Polaris Xpedition Red Apex Lights by Ravek (Lifetime Warranty)

Introducing the first-ever 100% Plug & Play UTV running and brake light. With an Unlimited Lifetime Warranty and custom vehicle-specific wiring for more than 35 different UTV models, Apex Lights™ have raised the standard for UTV accent lighting.

Here’s an overview of what you get with the Red Apex Lights™:

• Two Apex Lights. IP67-Rated, 100% waterproof and dustproof
• Custom Plug & Play wire harnesses for the Xpedition
• Multi-Mount Hardware: mount Apex Lights™ to any flat body panel, roll cage, roof or bumper

• 5x Brighter than Polaris OEM rear running and brake lights
• 54 LEDs in each light, with perfectly diffused light output (no LED diode “hot spots”)
• Heavy-duty, impact-ready and scratch-resistant polycarbonate lenses
• Aluminum heat-sink frame
• Extreme lighting efficiency: 2 Amps per pair of Apex Lights™

When you brake, the Red Xpedition Apex Lights™ pulse rapidly. After a split second of pulsing, the brake lights then hold a standard brake light output that is 300% brighter than OEM brake lights. This pulsing effect increases visibility to trailing drivers and makes it clear you’re slowing down.

The Polaris Xpedition Apex Lights™ are IP67-rated, 100% waterproof and dustproof lights. Each light has a smoked polycarbonate lens built to withstand 2,600 pounds of pressure per square inch.

The Xpedition Apex Lights™ are engineered to display perfect LED diffusion. That means Apex Lights™ throw off a perfectly consistent, clean beam of light with no LED diode “hot spots”. 

Overview:

• Add more brake lighting anywhere on your SXS.
• Mount Anywhere: Roof, Panel, Bumper Cage
• Flashes when braking for greater visibility
• IP67 Waterproof & Impact-Ready
• Truly Plug & Play DIY Installation
• Estimated Install Time: 90 Minutes
• Unlimited Lifetime Warranty

500% Brighter Than OEM Taillights: Be prepared and visible in dusty or low-visibility conditions. The Apex Light™ runs 5x brighter than Polaris Xpedition stock taillights. When you brake, they pulse four times before delivering 300% brighter light than OEM brake lights through their ultra-durable, 8” rigid lenses.

Customized To You With Next-Generation Diffused LEDs: Mount to ANY flat surface or 1.25”-2.5” roll bar, including bumpers. Seriously. Fully Plug & Play installation for Xpedition models in under 90 minutes with no drilling required. Add up to four sets – eight lights total – on your roof, roll bar, bumper, or wherever else you can imagine. Custom diffusion panels deliver a clean, futuristic look.

Rugged, Nearly Indestructible Formed Lights: IP67-rated with heavy-duty polycarbonate lenses, aluminum heat-sink frames, and premium waterproof wiring make these lights ready for anything. We’ve rolled our UTVs and knocked them into trees at speed without leaving even a scratch on the Apex lights. Seriously. But try to avoid rolling please.

• Waterproof Rating: IP67
• Amperage: 0.25A - 1.1A
• Raw Lumens
  • White - 1,512
  • Amber - 1,080
  • Red - 378
• Watts: 10.5 - 15.4
• Temperature Rating: -40 F - 140 F
• Weight - 4.2 oz
• Size - 7 7/8"L x 7/8"W
• Installation Options
  • Plug & Play Harness
  • Roll Bar Mount
  • Adhesive Mount
  • Drill or No-Drill

Our engineers designed the Xpedition Apex Lights™ to install simply and securely, every time. No prior installation experience required – we promise.

First-time installers can expect to complete the DIY installation easily.

The Polaris Xpedition Apex Lights™ include 100% custom Plug & Play wiring and mounting hardware for your Polaris Xpedition.

RAVEK’s vehicle-specific installation video guides walk you through each step of the process to deliver a fun and efficient DIY installation experience.

If you already have a Plug & Play UTV Turn Signal Kit Installed, you can easily sync Red Apex Lights™ to blink in unison with your existing turn signal lights. All necessary components included.

If you’re interested in making your UTV street legal, check out RAVEK’s full Turn Signal Kit for the Polaris Xpedition